Quick Answer: How Far From The Ceiling Should A Shelf Be Hung?

How do you hang a shelf on a ceiling?

Prepare your boards.

Find studs on ceiling.

Drill holes in ceiling.

Screw four screw hooks into ceiling.

Attach four screw eyes to shelf.

If attaching a wire-concealing board, do so now.

Attach a wire clamp to one end of each cable/wire rope.

Attach the non-looped side of your four cables to the shelf’s screw eyes.More items…•.

How far can a shelf span without support?

The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.

What is the average distance between shelves?

between 8 and 12 inchesAverage Shelf Spacing A good average spacing for shelves is between 8 and 12 inches. If you have oversize books to store, you might prefer to increase the spacing to 15 inches.

What is standard shelf spacing?

Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves. To prevent the case from looking and being top-heavy, use a smaller shelf spacing near the top and a larger one near the bottom.

How thick should my shelf be?

Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

How far should a shelf be from the ceiling?

12 inchesAt the very minimum, your shelves should be at least 12 inches apart. However there are exceptions, depending on the use. It can range from 8″ to 16″. Again, I used the level to make sure it was straight.

How much space should be between wall shelves?

7 to 15 inchesAs a rule of thumb, shelf spacing usually ranges from 7 to 15 inches. More space might become necessary when displaying tall items. A quick measurement of the tallest item you plan on including in your ledge display will help you assess how much space you need.

How much support does a shelf need?

Supporting brackets for most shelves should be spaced no more than 24 inches apart for light to medium loads (15 to 20 pounds per foot).

How do you make a shelf not wobble?

Drill a hole for each foot in the underside of one of the legs and tap in the foot, using a hammer. Right the bookshelf and put it back into position. Raise or lower each foot until the bookcase stops wobbling. Raise the feet by turning them clockwise; lower them by turning them counterclockwise.

How much weight can a shelf hold?

How much weight can a lack shelf hold? It’s mostly dependent on how the shelf is anchored to the wall. If you’re using plastic drywall plugs and a few screws, then I wouldn’t put much more than 50 lbs. on a single shelf.

How thick should a floating shelf be?

3 inchesThis is the shelf tutorial you need! I love the look of floating built-in shelves, but most tutorials have shelves that look very bulky and are at least 3 inches thick.

How do you calculate the space between shelves?

Measure the thickness of each shelf and calculate the total of these. Subtract this from the height and you now have the total distance of the space between all the shelves. Divide this by the number of spaces and that is your measurement. So each space will be 1786 divided by 7 = 255.14 mm round this off to 255 mm.