How Long Do I Wait To Add Algaecide After Shock?

Can algaecide and shock be used together?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together.

This is because when you mix chlorine and algaecide together, it renders both of them useless.

Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM..

How long does it take for algaecide to dissipate?

As for your foaming, it will dissipate over time as the algaecide will slowly break down from chlorine. You can shock the pool with higher chlorine levels if you want to get rid of it faster, but this is not necessary as it will go away probably in about a week (two at the most).

Can I add shock and chlorine at the same time?

Yes, you can add both shock and chlorine to a pool. However, you should not add them at the same time. The best thing to do is to shock your pool first. Then, once the chlorine levels go down to a certain threshold, you can add more chlorine.

What do you do if you put too much algaecide in your pool?

Remedy. Adding too much algaecide will have a counterproductive effect. The product will have a tougher time working when it’s saturated in the water. There’s not much to remedy an algaecide overdose except letting it naturally dissipate.

How often should you add shock to a pool?

It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.

Can you shock a pool two days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

Can you shock a pool with chlorine tablets?

However, it’s important to note that you can’t shock your pool with regular chlorine tablets. While pool shock is usually made from chlorine, pool shock chemicals are much more highly concentrated. Proper shock treatments are designed to literally “shock” your pool and raise the chlorine level quickly.

Why is my pool still green after shock and algaecide?

If you do receive a higher reading this simply means your water is alkaline and may potentially turn cloudier than normal after the chemically shocking your pool. You simply need to introduce hydrochloric acid to the water as this acid neutralises basic elements. Don’t worry if you’ve accidentally added too much.

Why is my algaecide foaming?

The algaecide in the kit can cause some foam if there is no algae in the pool to destroy – it lingers around with nothing to kill. Spring time algaecides use surfactants to work and these molecules can react with agitation to cause froth. … the pool equipment can draw air in the system that can cause foamy bubbles.

How long after putting shock in pool can I add clarifier?

about 20 minutesHow long after putting shock in pool can I add clarifier? 8) How long after adding chemicals can I swim? Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals. Wait about 20 minutes, and you are free to swim.

How long does pool stay cloudy after shock?

If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy. If the cloudiness persists 24 hours after shocking, then it’s possible that you used a poor-quality chlorine shock.

How long after adding pH down can you add shock?

8) How long after adding chemicals can I swim? Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals. Wait about 20 minutes, and you are free to swim. We suggest adding algaecide, Super Erace, and shock at night, after everyone is out of the pool.

Is shock and stabilizer the same thing?

Also known as pool conditioner, chlorine pool stabilizer, or chlorine stabilizer you can buy this chemical additive as either liquid or granules. It’s also often called cyanuric acid, a chemical that may be included in chlorine tablets or sticks (called trichlor) or shock (called dichlor).

Can I add stabilizer and shock at the same time?

You can even get it mixed in with chlorine tablets or sticks, called trichlor, and in chlorine shock, called dichlor. These combination products are referred to as stabilized chlorine because the stabilizer is mixed right in with the sanitizer, saving you the trouble of measuring and adding them separately.

Do I use shock or algaecide first?

Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.

Can you over shock a pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

Does shock raise cyanuric acid?

The Cyanuric acid does not have that obstacle to overcome so it stays in your water. When you “shock” continuously what you’re doing is your actually increasing the Cyanuric acid levels stedaly but the chlorine levels go up fight off what they need to then they come right back down.

Can I add clarifier after shock?

Add Stain & Scale chemicals a day before or several days after, shocking a pool. … Wait 5-7 days to treat again with clarifier, closely following dosage instructions.

How do you super shock a green pool?

Shock Your Pool with Chlorine to Kill Algae This is the main event in clearing a green pool—killing the algae. Pool shock contains a high level of chlorine that will kill the algae and sanitize the pool. For the best results, use a shock that contains at least 70% available chlorine, and shock the pool twice.

How can I make my green pool clear faster?

How to Get Rid of Green Algae in a PoolRemove Debris and Brush the Pool.Test the Water.Balance the Pool Chemistry.Treat the Water with Shock.Vacuum and Run the Filter After.Deep Clean Your Filter.Overnight Chlorine Loss Test (OCLT)Why is My Pool Water Still Green After Shocking?More items…•

Do I add chlorine or stabilizer first?

Open your pool under normal procedures, and let the filter run with its normal amount of chemicals. When all the other chemicals, such as chlorine. pH and alkalinity, are balanced, add the chlorine stabilizer. Add the stabilizer only after the filter has been backwashed to ensure it is cycled through a clean filter.